Anillo Difusor para Corte por Plasma Manual

Anillo Difusor para Corte por Plasma Manual

Marca:

Anillo Difusor para uso en equipos de corte manual Hypertherm.

Descripción

Anillo Difusor para uso en equipos de corte manual Hypertherm. Este consumible es requerido para los siguientes modelos:

Powermax30 XP

  • Standard: 420211
  • FineCut: 420211
  • HyAccess: 220670

Powermax45 XP

  • Drag-cutting: 220857
  • FineCut: 220947
  • Max control gouging: 220857
  • Precision gouging: 220857
  • Marking: 220857
  • FlushCut: 420634
  • HyAccess cutting: 220857
  • HyAccess gouging: 220857

Powermax65

  • Drag-cutting: 220857
  • FineCut: 220947
  • FlushCut: 420634
  • Max control gouging: 220857
  • Max removal gouging: 220857

Powermax85

  • Drag-cutting: 220857
  • FineCut: 220947
  • FlushCut: 420634
  • Max control gouging: 220857
  • Max removal gouging: 220857

Powermax105

  • Drag-cutting: 220994
  • FineCut: 220947
  • FlushCut: 420634 (30-45 Amp) / 420539 (65-105 Amp)
  • Max control gouging: 220994
  • Max removal gouging: 220994

Powermax125

  • Drag-cutting: 220997
  • FineCut: 420159
  • Hyamp FlushCut: 420484
  • Max removal gouging: 220997
  • Max control gouging: 220997

Powermax1000

  • Shielded: 120925 (40, 60 Amp)
  • Unshielded: 120925 (40, 60 Amp)
  • Gouging: 120925 (60 Amp)
  • FineCut: 220327 (40 Amp)

Powermax1250

  • Shielded: 120925 (40, 60, 80 Amp)
  • Unshielded: 120925 (40, 60, 80 Amp)
  • Gouging: 120925 (60–80 Amp)
  • FineCut: 220327 (40 Amp)

Powermax1650

  • Shielded: 120925 (40, 60, 80 Amp) / 220051 (100 Amp)
  • Unshielded: 120925 (40, 60, 80 Amp) / 220051 (100 Amp)
  • Gouging: 120925 (60–80 Amp) / 220051 (100 Amp)
  • FineCut: 220327 (40 Amp)

Antorcha Retrofit Duramax HRT/HRTs/MRT para Powermax1000 / Powermax1250 / Powermax1650

  • Drag-cutting: 220857 (45, 65, 85 Amp) / 220994 (105 Amp)
  • Max Removal Gouging: 220857 (45–105 Amp) / 220994 (105 Amp)
  • Max Control Gouging: 220857 (45–105 Amp) / 220994 (105 Amp)
  • FineCut: 220947 (30–45 Amp)
  • HyAccess drag-cutting: 220857 (30–65 Amp)
  • HyAccess gouging: 220857 (30–55 Amp)

Antorcha Retrofit Duramax HRT/MRT para Powermax600 / Powermax800 / Powermax900 y MAX42 / MAX43

  • Drag-cutting: 220857 (40–55 Amp)
  • Max removal gouging: 220857 (45–65 Amp)
  • Max control gouging: 220857 (45–65 Amp)
  • FineCut: 220947 (30–45 Amp)
  • HyAccess drag-cutting: 220857 (30–65 Amp)
  • HyAccess gouging: 220857 (30–55 Amp)

Antorcha Retrofit RT60/RT60M para Powermax600 / Powermax800 / Powermax900 y MAX42 / MAX43

  • Shielded: 120925 (40, 60 Amp)
  • Unshielded: 120925 (40, 60 Amp)
  • Gouging: 120925 (60 Amp)
  • FineCut: 220327 (40 Amp)

Antorcha Retrofit RT80/RT80M para Powermax1100

  • Shielded: 120925 (40, 60, 80 Amp)
  • Unshielded: 120925 (40, 60, 80 Amp)
  • Gouging: 120925 (60–80 Amp)
  • FineCut: 220327 (40 Amp)

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Anillo Difusor para Corte por Plasma Manual”

Abrir chat
¡Hola! ¿Cómo podemos ayudarte?